3.4 to 4.2 GHZ Radio Over Fiber

(3.4 to 4.2 Ghz) Radio Over Fiber

The Fiber Optic Transmitter CCSL-Tx-C-2000-FC and Fiber Optic Receiver CCSL-Rx-C-FC are designed for electrical-to-optical (E/O) and Optical to Electrical (O/E) conversion of broadband RF signals over a frequency 3.4 to 4.2GHz

Using both these modules, a broadband linear optical link, capable of supporting the transmission of RF signals over single mode optical fiber could be achieved for many applications such as RF transmission, Optical delay line, and Antenna Remoting.

FEATURES:

Bandwidth 3.4 to 4.2 GHz
WDM & CWDM Compatible
High Dynamic Range
Immune to EMI

Specifications
Frequency	3.4 to 4.2 GHz
Gain	+0 dB (typical) or better
Flatness(max)	± 1 dB (3.4 to 4.2 GHz)
Dynamic range	-10 to -60dBm
Max RF input power handling	0 dBm or better
Input P1	-10 dbm
Input IP-3(min)	+15dBm
Noise figure(max)	25dB or better
RF input &output interface	50 ohm, SMA(F)
Operating wave length	1550
Modulation type	Direct
Optical output power	3 ± 2dBm
Back Reflection	35dB
Optical interface	FC/APC

Specifications

Frequency

3.4 to 4.2 GHz

Gain

+0 dB (typical) or better

Flatness(max)

± 1 dB (3.4 to 4.2 GHz)

Dynamic range

-10 to -60dBm

Max RF input power handling

0 dBm or better

Input P1

-10 dbm

Input IP-3(min)

+15dBm

Noise figure(max)

25dB or better

RF input &output interface

50 ohm, SMA(F)

Operating wave length

1550

Modulation type

Direct

Optical output power

3 ± 2dBm

Back Reflection

35dB

Optical interface

FC/APC